Terex Finlay 390 Rinser

SPECIFICATION HOPPER AND GRID Hopper capacity: 8m³ (10.5yd³) with tipping grid Grid opening: 4.25m (14’)

Feed with wing plates: 4.76m (15’ 8”)

Feed height: 3.77m (12’ 4”)

Grid aperture: 100mm (4”) Adjustable height and angle remote tipping grid with wing plates

Remote control hydraulic tipping reject grid c/w grouser bars 4.25m x 100mm spacing (14’ x 4”)

SCREEN BOX 2 bearing high performance screen box 3.66m x 1.53m (12’ x 5’) top deck 3 meshes (side tensioned) 3.66m x 1.53m (12’ x 5’) bottom deck 2 meshes (end tensioned)

Screen speed: 1200 rpm Screen Motor: 51cc/REV Hydraulic angle adjustment

MAIN CONVEYOR Belt Width: 1m (40”) 3 ply belt, EP400, Hydraulic drive with skirting 800cc/

REV Motor Belt speed: 92mpm (302’ per min)

BELT FEEDER Belt Width: 1.05m (41”) 3 ply belt, EP500, with 127mm diameter close pitched rollers.

Drum centres: 4.28m (14’ 1”) Hydraulic variable speed drive 800cc/

REV Motor Wide mouth opening Belt speed: 0 – 16 mpm (0 – 53’ per min)

TANK CAPACITIES Hydraulic Tank Capacity: 500 litres / 110 UK gal / 132 US gal Fuel Tank Capacity: 336 litres / 74 UK gal / 88 US gal

POWERUNIT Tier 4i/ Stage IIIA: Deutz D914 L04i

Engine Power: 53kW (71hp) Engine Speed: 2300 rpm

Pump 1: Tandem 36cc/33cc The first section of this pump drives the belt feeder and operates the tipping grid. The second section drives the main conveyor and screenbox

Pump 2: Tandem 33cc/22cc This pump supplies oil for the three stockpiler drives.